Wenn dies dein erster Besuch hier ist, lese bitte zuerst die Hilfe - Häufig gestellte Fragen durch. Du musst dich registrieren, bevor du Beiträge verfassen kannst. Du kannst auch jetzt schon Beiträge lesen. Suche dir einfach das Forum aus, das dich am meisten interessiert.
Dein Chef legt also keinen Wert auf ein Austauschgerät am nächsten Tag, falls das NB mal kaputt ist?
Solidworks läuft selbst auf dem 5 Jahre alten NB von meinem Bruder mit 1,8 ghz CoreDuo und 2 GB Ram und ner Ati Radeon mobilty x1600 oder so noch annehmbar. Das ist jetzt nicht wirklich ein KO Kriterium. Ich sag mal, das läuft auf jedem NB ab 800 ohne Probleme.
Does SolidWorks make use of multiple and/or dual core processors?
SolidWorks actually uses multi-thread technology for certain functions. This is different from when we talk about multi-cores. Multi-core describes the CPU. It is the operating system that ultimately decides what Core each Thread runs on. Windows 7 is said to utilize multiple processors more efficiently compared to Vista with XP being even less so.
Only certain functions of SolidWorks can actually utilize multi-thread technology. Running simulation analysis, rendering images, file opening and user interface activities (redraw, dialog boxes) can take advantage of multiple cores as there are multiple calculations that can be determined simultaneously. When opening documents in SolidWorks 2011, a view-only state is provided where you can zoom, rotate, etc while the actual file and its components are opened in the background. Once the file is fully opened, the environment is changed to the normal editing state. In contrast, the solving process used for parametric modeling is by nature linear and can only be run on a single thread. Consequently this cannot be spread across multiple processors and one core will take the brunt of the calculations.
In general, rebuild times depend on the speed of the CPU, simulation analysis and image rendering depends on having more cores and RAM, and file opening mainly depends on the hard drive speed.
Keep in mind that the fastest machine is no substitute for good design practices. Minimizing in-context references and utilizing lightweight modes will reduce the load on the processor.
Does SolidWorks make use of multiple and/or dual core processors?
SolidWorks actually uses multi-thread technology for certain functions. This is different from when we talk about multi-cores. Multi-core describes the CPU. It is the operating system that ultimately decides what Core each Thread runs on. Windows 7 is said to utilize multiple processors more efficiently compared to Vista with XP being even less so.
Only certain functions of SolidWorks can actually utilize multi-thread technology. Running simulation analysis, rendering images, file opening and user interface activities (redraw, dialog boxes) can take advantage of multiple cores as there are multiple calculations that can be determined simultaneously. When opening documents in SolidWorks 2011, a view-only state is provided where you can zoom, rotate, etc while the actual file and its components are opened in the background. Once the file is fully opened, the environment is changed to the normal editing state. In contrast, the solving process used for parametric modeling is by nature linear and can only be run on a single thread. Consequently this cannot be spread across multiple processors and one core will take the brunt of the calculations.
In general, rebuild times depend on the speed of the CPU, simulation analysis and image rendering depends on having more cores and RAM, and file opening mainly depends on the hard drive speed.
Keep in mind that the fastest machine is no substitute for good design practices. Minimizing in-context references and utilizing lightweight modes will reduce the load on the processor.
ich sagte ja "wenn es damit genauso umgeht wie SE oder INV" nämlich sogut wie gar nicht. und da können die mit offiziellen blabla daherkommen so oft sie wollen. ich arbeite seit knapp 9 jahren mit den programmen und da kann keins mehr als 1 kern ordentlich auslasten.
oh, ja, bei renderarbeiten funktioniert das vielelicht, aber wie oft rendert ein Konstrukteur seine baugruppen?? ich habe es schon öfter gemacht, aber nie wirklich gebruacht und da sah die CPU auslastung auch eher nach idle aus als sonst was (bei einem 6kerner der auf 16% auf allen kernen rumgurkt merkt man nicht gleich ob der nicht doch schon fertig ist)
in Workstations sind normalerweise ausgewählte CPUs (Intel: Xeon ; AMD: Opteron) und Grafikkarten (Nvidia: Quadro ; AMD: FirePRO) verbaut.
dabei sind einige Features zusätzlich aktiviert im gegensatz zu den "normalen" ausführungen. speziell bei den Grafikkarten hast du einen ordentlichen Support. da werden Treiber nicht auf spiele optimiert, sondern auf "richtige" Programme ;)
hier mal ein benchmark einer geforce und quadro
http://www.tomshardware.com/reviews/quadro-fx-4800,2258-10.html
komplett Workstations (DELL, HP, usw..) werden auch oft von den Softwareherstellern speziell mit ihrer Software getestet (zertifiziert). du hast also da auch nochmal eine gewisse Garantie das alles funktioniert.
Wenn das alles nicht so wichtig ist und ihr mit eventuell auftretenden Problemen zurecht kommt, kann man auch die normalen CPUs und Grakas nehmen.
mobile workstation gibts auch, mein erster link zu dem Schenker notebook kann man als mobile Workstation bezeichnen (ok, ist kein xeon drinn, aber ne quadro).
preislich war das auch soweit das günstigste das ich gefunden hab wenns in richtung Workstation geht.
standrechner könnte so aussehen http://geizhals.at/deutschland/?cat=WL-186335
Also erstmal: Eine Workstation kauft man zusammen mit einem Servicevertrag, gerade wenn damit Geld verdient werden soll.
Stellst du dir die Workstation selber zusammen musst du, wenn was kaputt ist allem hinterherrennen. Mainboard kaputt, 3-4 Wochen warten. Oder erstmal den Fehler finden. Das ist ja nicht zum amüsieren da. Bei einem Gamer PC zockt man halt einfach 3 Wochen nicht, das ist zwar ärgerlich aber nicht kostenkritisch.
Ich weiß nicht was das für eine Firma ist. Scheint allerdings eher hobbymäßig zu sein. Bei einem vernünftigen Computer ist ein SLA dabei, und alĺein das kostet schonmal 200-300 Euro. Das beinhaltet meist Hardwaretausch vor Ort durch einen Mitarbeiter des PC-Herstellers innerhalb einer fest vereinbarten Zeit.
Dein Chef soll sich also erstmal klar werden ob er sowas überhaupt will. Dann kann man hier weitermachen.
gut, da hast du recht.
aber bei den meisten Herstellern ist es auch mit 2000 für eine WS nicht getan (wenn man dann überhaupt das bekommt was man will)
hier hab ich noch ne Workstation von Dell gefunden
http://configure.euro.dell.com/dellstore/config.aspx?oc=w08t1607&c=de&l=de&s=bsd&cs=debsdt1 &model_id=precision-t1600
CPU reicht eigentlich, ich würde halt nur die grafikkarte auf ne quadro 2000 upgraden
Kommentar